0755-27835335
SL-940
The Nordson ASYMTEK Select Coat conformal coating system is designed to provide the highest quality and productivity for automated coating processes. The system is available in batch, in-line, and customized configurations. A variety of fluid systems and applicators increase flexibility in applying a range of fluids. Conformal coaters specified for today's needs can be modified as future requirements evolve. Utilizing the dual or triple bracket, the Select Coat can handle up to three individually controlled applicators, including airless film coaters, tri-mode swirl, and droplet.
Share:
Details

Features and Benefits

? Integrated process controls ensure high-quality wet dispense performance

? Automated batch or in-line processing

? The modular design accommodates future production needs

? Easy Coat? software – allows programmers to set,measure, record, and trace process parameters

? Offline and online programming

? Choose from a wide range of options – to improve statistical process control, production uptime, and yield

? Downdraft air management system safely removes VOCs – meeting Low Flammable Limits (LFL) standards

? Designed for easy maintenance – stainless steel surfaces are easy to clean and resistant to strong agents


Series Specifications

Motion System

Type: Closed-loop servo motors

with encoders

X-travel: 500 mm

Y-travel: 525 mm

Z-travel: 100 mm maximum

Encoder Resolution: 0.005 mm. (0.0002 in.)

X-Y Velocity: 1.0 m/s (39.4 in./s)

X-Y Acceleration: 1 g peak with S-curve jerk control

Z-Axis Velocity: 250 mm/s (10 in/s)

X-Y Repeatability: 0.025 mm. (0.001 in.), 3 sigma

Z-Axis Repeatability: 0.025 mm. (0.001 in.), 3 sigma

X-Y Resolution: 0.010 mm. (0.0004 in.), 3 sigma

Z-Axis Resolution: 0.025 mm. (0.001 in.), 3 sigma

Positional Accuracy: 0.075 mm. (0.003 in.), 3 sigma


Conveyor

In-line: Standard chain conveyor

Motor driven width adjustment: 35 to 475 mm (1.4 to 18.7 in.)

Maximum clearance: 100 mm (4 in.) above and below PCB

Maximum pallet/PCB weight: 5 kg (11 lbs.) [Optional: 7 kg (15 lbs.)]

Adjustable Tooling Rails

Aluminum extrusion profile: The rail spacing is adjusted

by moving the back rail

Width adjustment: 35 to 475 mm (1.4 to 18.7 in.)

Maximum clearance: 100 mm (4 in.) above and below PCB

Maximum pallet/PCB weight: 7 kg (15 lbs.)

Tooling plate is also available: Aluminum; 5 mm (0.2 in.) thickness;

508 x 508 mm (20 x 20 in.)


Facilities Requirements

System footprint:

1000 mm width x 1329 mm depth (39.3 x 52.3 in.)

Computer keyboard/monitor occupy additional 527 mm (20.7 in.)in the front

Lower door requires 855 mm (33.7 in.) clearance to open in the front 1000 mm clearance in the rear is recommended

Air supply: 620 kPa (90 psi. 6.2 Bar), up to 0.34 m3/min (20.4 m3/hr 12 SCFM) max depending on configuration

Ventilation, air: 340 m3/hr (200 SCFM) @ 25.4 mm (1.0 in.) water column Optional, nitrogen source:

410 kPa (60 psi, 4.1 Bar) @ 0.014 m3/min (0.84 m3/hr 0.5 SCFM); required for moisture sensitive materials

Main power: 200/240 VAC, 10 A (max), 50/60 Hz

Note: System can run on 120 VAC without heater option installed.

Noise: Peak ≤ 76.0 dBA; Average ≤ 70.7 dBA

System weight: 426 Kg (940 lbs.) max

Standards compliance: SMEMA, CE, NFPA, and SEMI




Online Service1Online Service 2
XML 地图 | Sitemap 地图